SuperATV RackBoss 2.0 Rack And Pinion

Every rack eventually wears down, gets sloppy, and makes your steering and responsiveness feel like crap. Or at least every rack did until RackBoss® 2.0. SuperATV took the original RackBoss and upgraded it to be the strongest, most durable rack on the market. It’s also made with a X24 Tech—a dual-bushing design you can’t get anywhere else. It reduces the wear you’d see on stock by over 50%. With SuperATV’s RackBoss® 2.0 Rack and Pinion installed on your machine, you can run massive tires and tackle deadly terrain. You can ride the way you want every day for years and quit worrying about your rack. SuperATV uses a dual PTFE bushing design to prevent the wear and tear that you’re used to. Thanks to the X24 Tech, which uses tough bushings at both ends of the rack, RackBoss® 2.0 can power through bigger hits with larger tires without getting sloppy steering. You get like-new operation that lasts longer than any other steering rack. Plus, the built-in grease fittings allow you to push out all the crud that can get in when you go hard in mud or water. It’s only possible with RackBoss® 2.0. The steel swaged tube tie rods are lightweight but strong. The swaged design significantly improves the strength of the 7/8" diameter tubing. They feature rebuildable inner ball and sockets that use beefy 14" rod threads and 16 mm rack threads. They’re paired with 14 mm outer tie rod ends to make sure the weak points are as strong as possible. They’re perfect for the casual rider that’s tired of their stock performance.

65% larger housing than stock

Over 50% less wear than OEM after 15,000 cycles

Grease fitting for rack gears

Heavy-duty dual PTFE bushings:

Designed with X24 Tech

Prevents wear

Reduces slop

Improves overall durability

Swaged tube tie rods use:

14 mm outer tie rod ends

Rebuildable inner tie rod ends that use 14 mm rod threads and 16 mm rack threads